All About Lloyds News

What You Have Always Wanted To Know About Woodworking

Jul 4

What You Have Always Wanted To Know About Woodworking

Most people don't know much about the hobby of woodworking. They think it's just a matter of cutting some wood, slapping it together and calling it a success. The fact is that there is more to it than that, and the tips below will guide you through the process.

Learn More

 

 

When budgeting for a project, do not forget to include the cost of any new tools you will need to acquire to finish it. This is easy to overlook if you are focused on the amount of wood you need to buy. But, if new tools or materials will be required, your budget may be exceeded quickly.

 

When sanding a piece of lumber, a lot of sawdust and debris is produced. To help remove those bits of dust and debris from your project vacuum the area. Then, remove the remaining debris using a tack cloth. Wipe both sides of the lumber to remove all traces of debris for best results.

 

Sometimes a little bit of glue is better than a clamp. Every woodworking shop should have a hot glue gun. Hot glue will hold small pieces better than any clamp ever could, if you could even maneuver one in place. When you are done, just gently pry loose with a putty knife.

 

Plan out your project and go over it a few times before you start. This will help prevent you from making mistakes that will ruin your project. You do not want to start it all over again, so plan it out well before you cut, screw or nail anything together.

 

Before even beginning a woodworking project, make sure you have an adequate and proper place to work in. You definitely don't want your living space filled with sawdust. Some woodworking supplies, such as stains, varnish and paint strippers, have noxious fumes. Ideally, you will have a detached garage or a shed to work in since an outside space is an ideal location.

 

Always check your tools before you begin using them. Woodworking with a faulty or overused tool can easily lead to a serious injury or destruction of your materials. To make sure that this does not happen to you take the time to thoroughly inspect your tools from top to bottom.

 

Make use one of the beveled inner part of a pencil sharpener. If you mount it on a small shaft, you can use it in a drill. It a good tool for shaping smaller pieces. When it gets dull, just sharpen it on an emery cloth by running the drill on a slow speed.

 

If you are new to woodworking, stick with a cheap and effective tool bag. Many of the tools to start with are under a couple hundred dollars and very easy to find and use for basic projects. These tools include a benchtop tablesaw, a jigsaw or sabre saw, a circular saw, a random orbit sander, a corded or cordless drill, a fixed-base or plunge router, and a pipe and small bar clamps.

 

As you learn more about woodworking, you'll find that things become easier. You'll be able to plan out your projects better, complete them on time and have end results which are impressive. Use this new knowledge to make your hobby the best it has ever been, time and time again.